Modular contactors are essential for the control and automation duties in houses, offices, shops and hospitals. They are particularly suitable for switching lighting installations, heat pumps, night storage heating, air-conditioned plant and for other devices in building automation.

Standardized design

Silent operating by virtue of DC solenoid system

Switching condition indication

“Finger Safety Guard”  acc. to VDE 0106 Part 100.

Technical data

Standard control voltage (Ue): AC  20-230V   

Thermal continuous current (IRn): 24, 40, 63A

Current ratings for AC1: 24, 40, 63A

Back up fuse g1 max  ratings: 35, 63, 80A

Mechanical endurance: 10 million cycles

Electrical endurance: 1 million cycles

Connection capacity:  tunnel terminal for cables up to 25mm

Pole number: 4 (either as main or auxiliary contacts)

Width:

            24A                 35.0 mm (2 poles)

            40A, 63A        52.5 mm (3 poles)

Model	Coil consumption On pull-in holding	Closing time	Opening time
24 A	4 W	25 – 35 msec	30 – 40 msec
40 A	5 W	15 – 20 msec	35 – 45 msec
63 A	5 W	15 – 20 msec	35 – 45 msec

Operating Condition

Ambient temperature -25°C ~ +55°C, average temperature not exceeding 35°C.

Altitude above sea level less than 2000 m.

Relative humidity not exceeding 50% at 40°C and not exceeding 90% at 25°C.

Installation class II or III.

Pollution class II.

Installation method DIN Rail mounting type.

Product shall be installed vertically at the place where there shall be no severe impact and vibration.